Garage doors are probably one of the busiest parts of a home. Operating it three to four times a day means it’s going up and down for a maximum of 1,500 times a year. Homeowners, however, rarely notice the work a garage door does every single day, making it easy for them to take its maintenance for granted.
Ignoring a minor problem can prove costly. Instead of avoiding the problem, you may have to dig deeper into your pockets to do the necessary repairs. There are several reasons why your garage door isn’t working properly. Knowing the possible causes will help you determine the best solution for it.
Dead Transmitter Batteries
Without enough power, your garage door transmitters won’t be able to send a signal to the door to open. In this case, you will need to replace the batteries on the transmitter. It’s not that hard to do: simply open the transmitter and remove the old batteries. You may have to use a screwdriver, depending on the type of your transmitter. Read more from this article: http://bit.ly/2u7RQgv
It’s easy to take them for granted, but door locks also need attention to maintain their good condition. While an average lock can last for at least seven years, you can prolong its lifespan with proper care and maintenance. Through proper maintenance, your locks can continue protecting your home from thieves and intruders.
Ensure that the Door is Properly Hung
Doors have to be installed properly to keep the lock working. A sagging or binding door may damage the lock’s latch or bolt by putting too much pressure on it. When this happens, the lock may fail and lock you in or out of your home.
To see whether the door is properly hung, check the gap between the door and the frame. It should have a uniform measurement (at least an eighth inch and less than a quarter inch) across the top and the sides. Read more from this article: http://bit.ly/2u7NrKw
To effectively protect your family, your property must first be secure. The statistics serve to remind homeowners of this urgency: Studies indicate that 2.5 million burglaries happen annually in the U.S. By adopting the following safety precautions, you can reduce the chances of break-ins and increase safety for your family.
Change the Locks
When you move into a new house, the previous owners possess at least one set of keys. Even if they leave a set for you, ask an experienced locksmith to rekey the entire house. You don’t know if someone with bad intent may have copied the previous owner’s keys or even obtained possession of them after your move.
When rekeying, a locksmith removes pins and springs, replacing them with a new set that works with an entirely different key. You no longer need to worry about an intrusion resulting from the previous homeowner’s carelessness or ill intent. Read more from this article: http://bit.ly/2uGdTYT
Unlocking doors when you lock yourself out or lose your keys is just one skill in the locksmith’s vast repertoire of talents. . They also help in making sure that unwanted parties are kept out of your property. After all, locksmiths know the best methods of keeping your property safe, from residential locks to high-security locks. With all the many locks available on the market, do you know which ones will fit your particular needs best?
Deadbolts are an excellent choice for an external door lock. They come in three forms—single cylinder, double cylinder, and lockable thumbturn. Single cylinders are the ones most commonly found in American homes. They are fairly simple, featuring a key slot on the outside and what’s known as a thumbturn on the inside to switch the lock back and forth. The thumbturn is what you see as you lock the door from inside. While it is quick and easy to lock, its weakness centers on the breaching of an adjacent portal, say a window, allowing the intruder to reach inside to turn the thumb latch. Read more from this article: http://bit.ly/2tT9CE0
You’re probably all too familiar with the looks of your garage doors. It’s the last thing you see when you leave home for work in your car and the first thing you see upon your return. Naturally, then, all the scratches, nicks and dents are basically in your face. These are the results of simple wear and tear in most cases. When they all add up to a blight that affects the entire look of your home, it’s time to consider replacing your garage doors.
Before shopping around, however, know which materials lend style and endurance at the same time so you will not need to repair or replace the doors any time soon.
Steel garage doors are a great option for any home. They are customizable in a couple of ways. First, if you are looking for insulation, they come with or without it. It’s a decision based on the type of items you keep in your garage and whether they require protection from the cold. Secondly, steel doors can be painted any color to match your house. Read more from this article: http://bit.ly/2tLhA2j
Keys are a part of our everyday lives. We use them to get in and out of our homes, our businesses, and our vehicles. We use them to store things and keep them safe. But, we tend to take little notice of them until we misplace them or grab the wrong ones.
Have you ever wondered how keys are made and the specific mechanisms that make them such powerful tools? How exactly are they duplicated? Discover how this process unfolds from start to finish.
Making Keys: The Materials Used
The process of locksmithing starts with deciding on the type of key-making material. The choice depends on several factors: the cost, the region, and the available resources. Read more from this article: http://bit.ly/2s3RvXC